Wemos D1 Push Button

Objectives:

Build a circuit and program that allow you to control when a light turns on and off.

Parts

Directions

Clone https://githubcom/awoehler/electronics.network
Open Examples/ButtonLight/ButtonLight.ino
Connect one side of a button to D3 and the other side to GND. Since D3 and D4 have built in resistors we don't need to add any other items to make this circuit work.
Compile and upload the sketch to the board. 

Exercises

  1. Change the program so that the button toggles the light on and off.

Comments

  1. ursasackriderFebruary 28, 2022 at 1:07 AM

    888casino Review - 100% up to £200 No Deposit Bonus
    888casino has been in the gambling world 가상 화폐 란 a long time. For 벳 익스 many years, it has bet built a reputation for 일본야구분석사이트 itself with 업소 사이트 a strong gaming portfolio and plenty of bonus

    ReplyDelete
  2. AnonymousDecember 8, 2022 at 12:39 AM

    Players can play the demo version; at the identical time, it's important to register at the casino. Players can utilize software purposes 우리카지노 that they can extract to their devices to supply a straightforward approach to function the game son cellular. The operator covers numerous language mode, likewise extra considerable forms of denominations.

    ReplyDelete

Post a Comment

Popular posts from this blog

Wemos D1 Blink

Blink is a simple program to get you started with our ESP8266 and the Arduino IDE. Objectives: Learn how to interact with the built in LED. Learn how to use the serial monitor. Parts Wemos D1  https://amzn.to/2yYBbMY Directions Clone https://githubcom/awoehler/electronics.network  Open Examples/Blink/Blink.ino Compile and upload the sketch to the board. Open then Serial Monitor and make sure that the board rate is set to 115200. Press the reset button on the Wemos and you should see Begin followed by off, on, off, on, ..... in the serial monitor. Exercises: Add comments explaining what each line of code does.  Change the blink pattern to transmit an SOS signal in morse code. 
Read more

Micro LED Light Bars

Image
While commuting to work on the bus I decided I needed something better than a Adafruit shipping box as a work area. Since I'm on the bus and frequently have to share the with someone else I'm limited to a work area the size of my lap with limited storage at my feet. I decided to give two small parts organizers a try. One with some of the dividers removed would be used as my work area and the other would be used for parts. I had picked up one recently for a reasonable price at Walmart for my RC's but didn't like how the center of it wasn't removable but the outside was. I figured with a little modification I could make it work though. So I headed down to Walmart and found that they had changed the design for the better as far as I was concerned. The new design has all of the removable dividers on one side and fixed dividers on the other. The problem is that winter is coming and it will be dark on the bus soon. So I've come up with two different light bar ideas...
Read more