Lab Tools, Supplies & Reviews

In this post I'd like to share what I use in my lab. Items with and asterisk (*) are items that you really need to operate a basic lab.

Tools

  • Power Supply: Dr. Meter PS305DM 30V/5A DC Bench Power Suply Single Output 110V/220V Switchable 
    https://amzn.to/2MWzxUh
  • *Volt Meter: Southwire Tools 16040T Compat Auto Range TrueRMS Multimeter
    https://amzn.to/33w5IQf
    I bought this locally at a building supply store. It has bluetooth but I haven't been able to connect to it with my phone yet because of OS version incompatibility. I really like the tester and the fact that it auto sets the size. The leads are nice but it would be nice to have some alligator clips on the ends so I purchased some push on alligator clips separately.  Here https://amzn.to/2KvV0l3
  • *Soldering Iron
    • Weller ? Watt
      • I've been using this for quite a while and it works reasonably well. I like the LED's though they are a little dim. My biggest complaint is that the tip has worn out very quickly. I like the tip on the DANIU PX-988 much better.
    • DANIU PX-988 90W Backlight LCD Digital Thermostat Adjustable Lead Free Electric Soldering Iron ESD Mini Soldering Station EU/US Plug 220V/110V - 110V US Plug
      https://amzn.to/2Z3Ark9
      • I've had this for 8 months and it has served me well. I heats up quicly compared to the Weller but it isn't as powerful either so it works better for smaller circuit joints but not larger wire connections. It says 90W in the name but I don't believe it has the thermal capacity that the Weller does though I haven't tested its wattage usage. It is really nice to be able to fine tune the temperature. I've even used it to weld PLA prints together.
  • *Soldering Stand
    https://amzn.to/2H4W5yu
    The sand looks a little flimsy but I bought it because I could unscrew it from the base and hook it into my peg board.
  • *Soldering Iron Cleaner
    https://amzn.to/2H06sU7This is a must have. It works so much better then cleaning your soldering iron with a sponge.
  • Quad Hands
    https://amzn.to/2N02Yoh
    I bought this after watching some of the guys at FliteTest use it. It is well built and doesn't want to tip over on you.

Supplies


NOTE: All links to Amazon on this page are affiliate links.

Comments

  1. James AnthonyMay 29, 2021 at 12:13 AM

    Analog soldering stations come with knobs to adjust the temperature control but they are not accurate enough. They are suitable for simple tasks like mobile phone repairing. https://solderingironguide.com/blog/resistor-color-codes/

    ReplyDelete

Post a Comment

Popular posts from this blog

Micro LED Light Bars

Image
While commuting to work on the bus I decided I needed something better than a Adafruit shipping box as a work area. Since I'm on the bus and frequently have to share the with someone else I'm limited to a work area the size of my lap with limited storage at my feet. I decided to give two small parts organizers a try. One with some of the dividers removed would be used as my work area and the other would be used for parts. I had picked up one recently for a reasonable price at Walmart for my RC's but didn't like how the center of it wasn't removable but the outside was. I figured with a little modification I could make it work though. So I headed down to Walmart and found that they had changed the design for the better as far as I was concerned. The new design has all of the removable dividers on one side and fixed dividers on the other. The problem is that winter is coming and it will be dark on the bus soon. So I've come up with two different light bar ideas
Read more

Wemos D1 Blink

Blink is a simple program to get you started with our ESP8266 and the Arduino IDE. Objectives: Learn how to interact with the built in LED. Learn how to use the serial monitor. Parts Wemos D1  https://amzn.to/2yYBbMY Directions Clone https://githubcom/awoehler/electronics.network  Open Examples/Blink/Blink.ino Compile and upload the sketch to the board. Open then Serial Monitor and make sure that the board rate is set to 115200. Press the reset button on the Wemos and you should see Begin followed by off, on, off, on, ..... in the serial monitor. Exercises: Add comments explaining what each line of code does.  Change the blink pattern to transmit an SOS signal in morse code. 
Read more